Set terminal to: (try 9600 if not responding)
: The smart card inside the box is not recognized, even if the box itself is installed. This often happens because the specific Feitian Rockey 200 rockey 200 driver gsm-forum
| Symptom | Likely cause | Solution | |---------|--------------|----------| | No response to AT | Wrong baud / power / serial polarity | Try 115200→9600→4800; check TX/RX swap | | +CME ERROR: 2 | SIM not inserted or PIN locked | Insert SIM, send AT+CPIN=1234 | | +CMS ERROR: 500 | SMS storage full | Delete old messages: AT+CMGD=1,4 | | Modem resets on GSM TX | Power supply too weak | Add 1000–2200µF capacitor or use 2A+ PSU | | No network ( +CREG: 0,2 or 0,3 ) | Antenna missing or wrong band | Attach GSM antenna (SMA or IPEX) | | USB not recognized | Driver missing / fake chip | Use older driver (Zadig / manual .inf) | Set terminal to: (try 9600 if not responding)
smart card reader driver (power dongle yellow ... - GSM-Forum Are you trying to get a specific GSM
driver is a common requirement for technicians on GSMHosting
Ensure no other smart card drivers (like those for bank tokens) are conflicting with the ROCKEY driver. Are you trying to get a specific GSM tool (like a box or dongle) to recognize the ROCKEY 200?
While drivers are often sought on forums for older systems, modern versions are HID-compliant, allowing them to work without manual driver installation on Windows, Linux, and macOS.