Foxconn N15235 Front Panel Connectors Google Verified · Fresh & Easy
The header consists of two rows of pins. The top row has 4 pins, and the bottom row has 5 pins (one is a "dummy" or "no connection" pin). Description HD-LED Hard Drive Activity Light Pin 1 (+), Pin 3 (-) 2 & 4 P-LED Power Status Light Pin 2 (+), Pin 4 (-) 5 & 7 RESET Reset Switch No specific polarity 6 & 8 PW-SW Power Switch No specific polarity 9 NC No Connection (Empty) Connection Tips
The Foxconn N15235 is a motherboard commonly found in OEM systems (e.g., certain Acer, Gateway, or Packard Bell desktops). Connecting the front panel (power button, reset button, HDD LED, power LED) requires careful attention, as the pin layout differs from standard retail motherboards. foxconn n15235 front panel connectors google verified
Based on aggregated technical data, the pinout typically follows this structure: The top row (starting from the left, looking at the board top-down) usually controls the Hard Drive LED and Reset switch. The bottom row handles the Power Switch and Power LED. Specifically, Pins 1 and 3 are commonly the positive and negative for the Hard Drive Activity LED, while Pins 5 and 7 often control the Reset switch (though polarity rarely matters for switches). The Power Switch is usually located on Pins 6 and 8 (or sometimes 6 and 10 depending on the revision), and the Power LED occupies the remaining pins. It is crucial to note that for LEDs, polarity is critical; if the LED does not light up, the connector simply needs to be flipped 180 degrees. For switches, polarity is irrelevant, reducing the margin for error. The header consists of two rows of pins
| | Signal | Function | Typical Wire Color | |---------|------------------|----------------------------|------------------------| | 1 | HD_LED + | HDD Activity LED (+) | Red or Orange | | 2 | HD_LED - | HDD Activity LED (-) | White | | 3 | POWER_SW | Power Button (NO) | Yellow/Brown | | 4 | POWER_SW | Power Button (GND) | White/Black | | 5 | RESET_SW | Reset Button (NO) | Blue/Green | | 6 | RESET_SW | Reset Button (GND) | White | | 7 | PWR_LED + | Power LED (+) | Green | | 8 | PWR_LED - | Power LED (-) | White | | 9 | KEY (no pin) | Blank / missing pin | – | | 10 | NC / SPKR | Speaker (optional) | – | Connecting the front panel (power button, reset button,
This is where the subject line came from. The "Google Verified" part. He had found a diagram on a dusty forum post from 2007, likely from a user named "CyberNinja99," and took it as gospel. The internet is a graveyard of misinformation, especially when it comes to hardware this old.
