Robopac Robot 2001: Manuale Work

| Problem | Probable cause | Action | |---------|---------------|--------| | Film breaks | Pre-stretch too high / rough load | Reduce pre-stretch; check load edges | | Ring stops mid-cycle | Photocell blocked or load too tall | Clean sensors; adjust max height setting | | Film not cut | Hot wire cold / blade dull | Check heater relay; replace blade | | Film loose at bottom | Bottom wraps insufficient | Increase bottom wraps (e.g., 4 → 6) | | Load unstable | Wrap force too low | Increase pre-stretch or overlap |

Approximately 1900 mm (L) x 1010 mm (W) x 2400 mm (H). Weight: Roughly 395 kg (approx. 870 lbs). robopac robot 2001 manuale work

: Like a seasoned dancer, the robot used its feeler wheel to maintain a steady distance from the pallet. The Photocell Eye | Problem | Probable cause | Action |

Elias stood before the hulking silhouette of the Robopac Robot 2001. : Like a seasoned dancer, the robot used