The "hardware information does not match with your dongle" error in Autodata 3.45 typically occurs when the hardware ID used to generate your license file (UID) does not match the actual hardware ID of the computer where the software is running. Core Cause and Solution This mismatch is often caused by an incorrect installation sequence or missing administrative privileges during license generation. To fix it, you must re-generate the license using your machine's unique ID. Detailed Troubleshooting Steps Generate a New UID Navigate to your installation folder (usually C:\ADCDA2\ ) or the GetUid folder provided with your installation package. Right-click the GetUid.exe (or similar) file and select Run as Administrator . Record the 8-digit code that appears in the pop-up window. Create and Register the License File Open your keygen or license batch file (often named License.bat or License example.bat ) with a text editor. Replace the existing hardware ID with your new 8-digit code . Save and run this batch file. It should generate a new registry file (e.g., license_Autodata.reg ). Double-click the new .reg file to add the updated hardware information to your system registry. Regional & System Settings Regional Format : Ensure your computer’s "Regional Format" is set to English (United States) in the Windows Control Panel, as other formats can cause verification failures. Test Mode : Verify that Windows is in "Test Mode." If it isn't visible in the lower right corner, you may need to disable Secure Boot in your BIOS or manually enable it via the command prompt. Sentinel Drivers : Ensure the Sentinel Runtime/Drivers are correctly installed and that the emulator is running as an administrator. Summary Table: Error Fixes Why it Matters 1. Admin Rights Run all installers and keygens as Administrator . Prevents registry write failures. 2. Clean Install Uninstall, run SSD Cleanup , and reboot. Removes old, mismatched license data. 3. UID Sync Match the 8-digit UID to the registry file. Directly resolves the hardware mismatch. 4. Emulator Start the nodongle.biz or equivalent emulator. Simulates the presence of the physical dongle. For a successful setup, always reboot after registering new files or installing drivers to ensure the changes take effect. Are you currently using Windows 10 or 11 , or an older operating system? Autodata Installation Guide for Windows | PDF | Computing - Scribd
The "Hardware information does not match with your dongle" error in Autodata 3.45 usually happens when the software license doesn't recognize your computer's Hardware ID (UID) or the virtual dongle isn't correctly active in your system registry . 🛠️ Step-by-Step Fixes 1. Re-Generate the License (UID Mismatch) This is the most common cause. The license file is tied to a specific Hardware ID. If you changed hardware or reinstalled Windows, you must regenerate it. Run GetUid : Go to your installation folder (usually C:\ADCDA2 ) and find GetUid-x86 or GetUid-x64 . Copy the Code : A box will show an 8 or 10-digit code. This is your computer's unique ID. Create New License : Use your keygen/license generator to create a new .reg file using this exact UID. Merge to Registry : Double-click the new .reg file and click Yes to import it. 2. Check the Virtual Dongle Status Autodata needs the "SafeNet Sentinel" driver to appear in your Device Manager. Restart Emulator : Find the folder AuDaS0 and run the emulator (often a green traffic light icon). Verify in Device Manager : Look under "Universal Serial Bus controllers" or "System Devices" for SafeNet Sentinel Hardware Key or AuDaS0 Virtual Device . Fix Exclamation Marks : If there is a yellow warning icon, right-click it and choose Update Driver , then manually point it to your emulator folder. 3. Adjust Regional Settings Autodata is very sensitive to system region settings. If they don't match the license, the dongle check often fails. Go to Control Panel > Region . Change the Format to English (United States) . Restart your computer. 4. Run as Administrator Lack of permissions can prevent the software from reading the dongle driver. Right-click the Autodata shortcut on your desktop. Select Properties > Compatibility . Check Run this program as an administrator and click Apply. ⚠️ Important Note: For Windows 10 and 11 users, you must disable Driver Signature Enforcement using a tool like DSEO or by booting into Windows Advanced Startup options to allow the virtual dongle to load.
Troubleshooting Autodata 3.45: "Hardware Information Does Not Match with Your Dongle" If you are a mechanic or a DIY enthusiast using Autodata 3.45, you’ve likely encountered the frustrating error message: "The hardware information does not match with your dongle." This error typically triggers when the software's security layer—which expects a specific hardware ID or physical security key—detects a discrepancy. Since Autodata 3.45 is an older, offline version of the software, this is a common hurdle during new installations or after Windows updates. Why Does This Error Occur? Autodata uses a licensing system tied to your computer's hardware (specifically the Motherboard ID and MAC address) or a physical USB dongle. The error appears because: Hardware Changes: You’ve replaced a component (like a network card or motherboard), changing your "Hardware ID." Registry Corruption: The Windows Registry entries that store the license key have been wiped or altered. Driver Issues: The Sentinel or HASP emulator drivers (which "trick" the software into thinking a dongle is present) are not running. Windows Updates: A recent update may have disabled the unsigned drivers required for the emulator to function. Step-by-Step Fixes 1. Run as Administrator Before diving into technical fixes, ensure the software has the permissions it needs. Right-click the Autodata icon on your desktop. Select Properties > Compatibility . Check "Run this program as an administrator" and click Apply. 2. Re-register the Licensing Components (The "Reg" Files) Most Autodata 3.45 installations come with a folder containing registry keys. Navigate to your installation folder (usually C:\ADCDA2 ). Look for .reg files (often named License.reg or reg86.reg ). Double-click them to merge the entries into your registry. Note: If you are on a 64-bit system, ensure you are using the 64-bit registry fix if provided in your installation package. 3. Restart the Sentinel/HASP Emulator The software looks for a "dongle." If you are using a virtual emulator, it may have stopped. Open Task Manager (Ctrl+Shift+Esc). Go to the Services tab. Look for "Sentinel," "HASP," or "HLServer." If they are stopped, right-click and select Start . 4. Disable Driver Signature Enforcement (Windows 10/11) Windows often blocks the third-party "crack" drivers used for Autodata 3.45 because they aren't digitally signed. Hold Shift while clicking Restart . Go to Troubleshoot > Advanced Options > Startup Settings > Restart . Press 7 or F7 to "Disable driver signature enforcement." Once the PC reboots, try running the "install.bat" file usually found in the emulator folder of your Autodata directory. 5. Update the Hardware ID (UID) If you have a "Keygen" or "License Generator" included in your download: Run the GetID.exe (or similar) tool found in the installation folder. Copy the code it generates. Run the Keygen, paste your ID, and generate a new registry file. Run that new registry file to "match" the software to your current hardware. A Note on Compatibility Autodata 3.45 was designed for Windows XP and Windows 7. If you are running it on Windows 10 or 11 , the hardware mismatch error is often caused by the OS's internal security features. If the steps above don't work, consider running the software inside a Virtual Machine (VM) running Windows 7 Professional for maximum stability. Did you recently update your Windows version or change any hardware components before this error started appearing?
This error message from Autodata 3.45 typically appears when the software’s licensing protection detects a mismatch between the connected USB dongle (hardware key) and the computer’s current hardware configuration. What does this mean? Autodata ties its dongle license to specific hardware IDs (e.g., hard disk serial, motherboard, MAC address) during installation. If the system detects changes, it blocks access. Common causes The "hardware information does not match with your
Hardware change – You replaced or added RAM, changed the hard drive/SSD, updated BIOS, or changed the network adapter. Windows reinstall or clone – The operating system or Autodata was reinstalled without reapplying the dongle patch. Driver issue – The dongle driver is missing, outdated, or corrupted. USB port change – On some older cracked versions, switching USB ports can trigger this. Using a virtual machine or remote desktop – Autodata often blocks these environments. Crack/patch conflict – If using a patched version, the crack might not fully match the dongle emulator.
Possible solutions 1. Reinstall the dongle driver
Go to Device Manager → Universal Serial Bus devices. Uninstall the HASP/Sentinel dongle entry. Disconnect and reconnect the dongle, then reinstall drivers (found in Autodata folder or from SafeNet/Sentinel). Detailed Troubleshooting Steps Generate a New UID Navigate
2. Re-apply the hardware fix Some cracked versions include a HardwareID Fix or DongleEmulator.reg file. Run as administrator, then restart. 3. Reset Autodata’s hardware profile
Delete the folder: C:\ProgramData\AutoData\License (backup first). Restart Autodata and re-enter license info if prompted.
4. Restore old hardware If you recently changed hardware, revert the change or reinstall Windows to the previous state. 5. Use original USB port Plug the dongle back into the port used during the initial installation. 6. Fresh install with antivirus off Create and Register the License File Open your
Uninstall Autodata completely. Disable antivirus (some block dongle emulators). Reinstall following the crack instructions exactly.
Note on legality Autodata 3.45 is outdated (released around 2015). The error often appears in unofficial/cracked versions . If you own a genuine license, contact Autodata support for a replacement or license reset. If not, consider that using cracked software may contain malware or trigger such persistent errors. Would you like help identifying whether your dongle is genuine or emulated?
