Nokia 105 Rm 908 Usb Pinout < TRENDING – 2026 >

| Pin No. | Signal Name | Function | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | 1 | VBUS | +5V Power | Red | | 2 | D- | Data Negative | White | | 3 | D+ | Data Positive | Green | | 4 | ID | Host/Slave detect (On-The-Go) | None/Unused | | 5 | GND | Ground | Black |

The Micro-USB port on the RM-908 follows the standard 5-pin configuration used for mobile charging and basic data functions. When the phone is viewed with the port facing you (and the wider side of the trapezoid at the bottom), the pins are ordered : Pin Number Description Pin 1 VCC / VBUS +5V Power Supply for charging. Pin 2 Data - (D-) Negative data line (often used for software flashing). Pin 3 Data + (D+) Positive data line. Pin 4 ID Typically not connected (NC) on this model. Pin 5 GND Ground / Negative terminal. Common Repair Scenarios Nokia 105 Rm 908 Usb Pinout

Battery Size Indicator (used to put the phone into "Test" or "Local" mode). Connection Point VBUS (+5V) Power input for charging Near the 3.5mm jack contact GND System Ground Any metal shield or battery negative BSI Local/Test Mode trigger Middle pin of battery connector RX/TX Data Transfer Internal motherboard test pads Charging Path and Jumper Solutions | Pin No

To access USB data (for flashing firmware or reading files), you must open the phone and use the test points under the battery. Pin 2 Data - (D-) Negative data line