LGA775 supporting Intel Core 2 Quad, Core 2 Duo, Pentium, and Celeron processors .
| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | Camera disconnected or IP address mismatch. | Check hardware connections; verify IP settings in the Configuration file ( config.xml or similar). | | High Tracking Error | Poor correlation model fit. | Ask the patient to breathe regularly; hit "Reset Model" to re-train the correlation algorithm. | | Lag/Latency | System overload or high computation load. | Close background applications; reduce the visualization frame rate in settings. | | DRR Mismatch | Incorrect CT windowing or geometry. | Re-calibrate the isocenter; check CT slice thickness import settings. | ipiella3 manual
Because these boards are legacy parts, the CR2032 battery may be dead. Replacing it can solve "Date/Time Not Set" errors or boot failures. LGA775 supporting Intel Core 2 Quad, Core 2
$ ./bin/ipiella3d --config config.ipi --start | | High Tracking Error | Poor correlation model fit
The IPIEL-LA3, also known by its HP/Compaq name , is an Intel-based motherboard designed for small form factor (SFF) PCs. Form Factor: Micro-ATX (roughly Chipset: Intel G43 Express. Processor Support: Intel Core 2 Quad (Yorkfield core) up to Q9xxx. Intel Core 2 Duo (Wolfdale core) up to E8xxx. Socket type: LGA 775. Memory (RAM): Four DDR2 DIMM sockets. Supports DDR2 800/667 MHz. Maximum capacity: Up to 8 GB (on 64-bit systems). Expansion Slots: 1 x PCI Express x16 (for graphics cards). 2 x PCI Express x1. 1 x PCI slot. Internal Connector Guide